[1] 梁光川, 郑云萍, 张建华, 等. 陆梁油田生产系统结垢机理及防垢对策研究[J]. 西南石油大学学报, 2006, 28(6):69-71. LIANG Guangchuan, ZHENG Yunping, ZHANG Jianhua, et al. Scaling mechanism of production system in the production system of Lu Liang oil field and Study on the Countermeasures of anti scaling[J]. Journal of Southwest Petroleum University, 2006, 28(6):69-71. [2] 康红欣, 王堃, 杨喻, 等. 气化灰水系统结垢原因分析与对策[J]. 中氮肥, 2015(3):10-13. KANG Hongxin, WANG Kun, YANG Yu, et al. Analysis and countermeasures of fouling in gasification ash water system[J]. Nitrogenous Fertilizer Progress, 2015(3):10-13. [3] 马业超. 常减压装置换热器结垢的实验研究[D]. 北京:中国石油大学, 2009. MA Yechao. Experimental study on fouling of heat exchanger in the crude distillation unit[D]. Beijing:China University of Petroleum, 2009. [4] 朱宇龙, 赵辉, 青俊. 基于结焦机理的有机热载体炉炉管在线寿命评估系统研究[J]. 工业锅炉, 2010(5):17-20. ZHU Yulong, ZHAO Hui, QING Jun. Study on remaining heater tube life online evaluation system of origanic heat transfer material heater based on tube coking[J]. Industrial Boiler, 2010(5):17-20. [5] 李锋, 杨道明. 导热油加热炉结焦问题的原因分析与控制[J]. 广东化纤, 2001(2):52-57. LI Feng, YANG Daoming. Heat conduction oil furnace coking problem analysis and control [J]. Journal of Guangdong Chemical Fiber, 2001(2):52-57. [6] 吴斌, 李杨, 郑阳, 等. 水平剪切波在板表面附着物厚度检测中的应用[J]. 机械工程学报, 2012, 48(18):78-84. WU Bin, LI Yang, ZHENG Yang, et al. Thickness measurement of surface attachment on plate with SH wave[J]. Journal of Mechanical Engineering, 2012, 48(18):78-84. [7] MA J, SIMONETTI F, LOWE M J S. Scattering of the fundamental torsional mode by an axisymmetric layer inside a pipe[J]. The Journal of the Acoustical Society of America, 2006, 120(4):1871-1880. [8] MA J, LOWE M J S, SIMONETTI F. Feasibility study of sludge and blockage detection inside pipes using guided torsional waves[J]. Measurement Science and Technology, 2007, 18(8):26-29. [9] 彭小兰, 吴超. 基于超声导波的有机热载体炉积碳检测技术[J]. 中国安全科学学报, 2013, 23(6):74-79. PENG Xiaolan, WU Chao. Organic heat transfer heater carbon detection technology based on ultrasonic guided wave[J]. Journal of China Safety Science, 2013, 23(6):74-79. [10] 毛捷, 王小民, 廉国选, 等. 板底薄层的超声谐振检测分析[J]. 声学学报, 2005, 30(2):149-152. MAO Jie, WANG Xiaomin, LIAN Guoxuan, et al. Analysis of the ultrasonic resonance test for a plate with a thin layer[J]. Acta Acustica, 2005, 30(2):149-152. [11] YOSHIDA M, ASANO T. A new method to measure the oxide layer thickness on steels using electromagnetic acoustic resonance[J]. Journal of nondestructive evaluation, 2003, 22(1):11-21. [12] OHTANI T, ISHILL Y. Nonlinear resonant ultrasound spectroscopy (NRUS) applied to fatigue damage evaluation in a pure copper[C]// Nonlinear Acoustics State-of-the-art and Perspectives:19th International Symposium on Nonlinear Acoustics. AIP Publishing, 2012, 1474(1):203-206. [13] MEO M, POLIMENO U, ZUMPANO G. Detecting damage in composite material using nonlinear elastic wave spectroscopy methods[J]. Applied Composite Materials, 2008, 15(3):115-126. [14] NOVAK A, BENTAHAR M, TOURNAT V, et al. Nonlinear acoustic characterization of micro-damaged materials through higher harmonic resonance analysis[J]. NDT & E International, 2012, 45(1):1-8. [15] OHTANI T, OGI H, HIRAO M. Evolution of microstructure and acoustic damping during creep of a Cr-Mo-V ferritic steel[J]. Acta materialia, 2006, 54(10):2705-2713. [16] PAYAN C, GARNIER V, MOYSAN J, et al. Applying nonlinear resonant ultrasound spectroscopy to improving thermal damage assessment in concrete[J]. The Journal of the Acoustical Society of America, 2007, 121(4):125-130. [17] 关晶波, 王建祥, 赵永红, 等. 滞后细观模型在岩石力学中的应用[J]. 力学进展, 1900, 34(3):349-359. GUANG Jinbo, WANG Jianxiang, ZHAO Yonghong, et al. Application of hysteresis model in rock mechanics[J]. Advance in Mechanics, 1900, 34(3):349-359. [18] 周正干, 刘斯明. 非线性无损检测技术的研究、应用和发展[J]. 机械工程学报, 2011, 47(8):2-11. ZHOU Zhenggan, LIU Siming. Nonlinear ultrasonic techniques used in nondestructive testing:A review [J]. Journal of Mechanical Engineering, 2011, 47(8):2-11. [19] 高桂丽, 李大勇, 董静薇等. 铝合金薄板疲劳裂纹的非线性声学特性[J]. 机械工程学报, 2010, 46(18):71-76. GAO Guili, LI Dayong, DONG Jingwei, et.al. Nonlinear acoustic characteristics of fatigue cracks in aluminum alloy sheet[J]. Journal of Mechanical Engineering, 2010, 46(18):71-76. |